Ethernet Senseit Link Gateway (Standard Power Supply)
Part #: P-G1M1-9E55
(Standard Power Supply)
$229.00
- Description
- Product Specification
- Documentation
- Applications
Description
The Senseit Link™ Ethernet gateway allows your Senseit Wireless Sensors to communicate with the iSenseit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will buffer up to 16,000 sensor data messages in on-board memory in the event of an internet connection interruption. When internet communication is re-established the sensor data will download to the iSenseit.com online system.
The Power-Over-Ethernet option features modified gateway hardware allowing it to be powered through the Ethernet port. Note: This option includes gateway modification only and does not include an Ethernet power injector.
Note: An iSenseit Gateway – Unlock Key must be purchased per Gateway so that a Gateway can be unlocked to communicate with the iSenseit Express software.
Product Features
- AC power supply (POE version also available)
- Existing Internet connection required
- No PC required for operation
- FCC, IC and CE certified
What’s in the box?
- Ethernet Gateway
- High Gain Antenna
- Power Supply
- Ethernet Cable
- Ethernet Gateway Quick Start Guide
Ethernet Gateway Specifications
| Dimension | 139.85 x 101.75 x 34.95 mm |
| Storage Temperature: | -20 to +85 °C (-4 to 185 °F) |
| Enclosure Material | ABS plastic |
| LED Lights | H/W status, iSenseit connection status, sensor data activity |
| Antenna Type | SMA: 5.0 dBi Gain |
| Operating Temperature | -10 to +70 °C (14 to +158 °F) |
| Device Memory | 16,000 sensor messages (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored) |
| Hardware | 10/100 Ethernet Controller |
| IEEE Standard Compliance | 802.3-2002 |
| Operation | Full- and Half-Duplex |
| Cross-Over Correction | Automatic MDI/MDI-X |
| Addressing | Pre-programmed MAC Address |
| Host Address | t1.sensorsgateway.com |
| Default Port | 3000 |
| Protocols Supported | UDP, DHCP, TCP, SNMP, MODBUS |
| Cable Connector | Cat 5 |
| Current Requirements, Full Operation | 225 mA steady |
| Interface Support | Real-Time TCP Interface SNMP Poll and Trap Interface MODBUS TCP Interface |
| Power Supply | 5.5 V AC adapter Power-Over-Ethernet option requires 5.5 V Ethernet power injector (not included) |
- Transmits sensor data to the iSenseit.com online sensor monitoring portal
- Commercial monitoring applications
- Facilities monitoring
- Small business monitoring
- Large business monitoring
Related Products
Ethernet Senseit Link Gateway (Power Over Ethernet)
$269.00Part #: P-G1M1-9EOE
(Power Over Ethernet)